Sectional Fire Gate
Sectional Gate EI60
A sectional fire gate uses linked panels whose track arrangement must fit the space around the opening.
Include the track path on the building section, not only the closed gate elevation. Record obstructions, access positions and the intended use of any wicket door. Obtain confirmed panel weight before designing the support and lifting arrangements.
Operating Principle
The panel movement and track geometry determine where structural support and clear space are required. Coordinate the drive, end positions and emergency operating method using the selected model instructions. A fire classification applies to the documented panel, guide, fixing and hardware combination; changing the track or adding an access door needs evidence for the revised assembly.
Dimensions
| Maximum Width | Maximum Height |
|---|---|
| 8.5 m | 5 m |
Leaf
Obtain the verified leaf mass, thickness and component specification for the proposed model before support design. The previous catalogue weight unit was inconsistent.
Principal Features
Include the track path on the building section, not only the closed gate elevation. Record obstructions, access positions and the intended use of any wicket door. Obtain confirmed panel weight before designing the support and lifting arrangements.
Installation
Technical Documents and Related Systems
Published dimensions describe catalogue arrangements. Confirm the exact dimensions, components and support against current product evidence before ordering.
BS EN 13501-2 — classification scope explains the standard scope; project suitability also needs the applicable assembly documents.
Product Videos
NEED A FIRE RESISTANCE SOLUTION?
- Classification matched to the approved project requirements.
- Technical evidence reviewed for the exact proposed configuration.
- Project-based coordination from initial review to installation inputs.