Rolling Fire Gate
Rolling Fire Gate
A rolling fire gate stores its leaf above the opening and closes down through side guides.
Measure headroom after allowing for beams, ducts and lighting. State normal operating frequency as well as the alarm duty. Identify which contractor provides power and control wiring so the installation can be commissioned as a complete assembly.
Operating Principle
The motor, controls and end-position devices form part of the specified arrangement. Headroom must accommodate the roll, drive and maintenance access, while the guides need suitable support at both sides. Record the required supply and behaviour on loss of mains power. Motor voltage, cycle rating and emergency operation must be taken from the selected model documentation.
Backup-power capacity and power-loss response are confirmed for the selected controls and project sequence.
What are the Uses?
Used for industrial and commercial openings where a rolling leaf and its required headroom fit the approved fire strategy.
Dimensions
| Maximum Width | Maximum Height |
|---|---|
| 8 m | 4.5 m |
Leaf
Weight: 23.2-29.5 kg/m2
Thickness: 43–48 mm
Guides
Made of a U-shaped steel profile with a thickness of 2 mm. Color: Ral or galvanized steel.
Installation
Technical Documents and Related Systems
Published dimensions describe catalogue arrangements. Confirm the exact dimensions, components and support against current product evidence before ordering.
BS EN 13501-2 — classification scope explains the standard scope; project suitability also needs the applicable assembly documents.
Product Videos
NEED A FIRE RESISTANCE SOLUTION?
- Classification matched to the approved project requirements.
- Technical evidence reviewed for the exact proposed configuration.
- Project-based coordination from initial review to installation inputs.